 |
 |
- This Page Sponsored by:
|
|
|
|
|
 |
 |
 |
The Chris-Craft name is synonymous with
both speed and craftsmanship. For more than
sixty years, this worldwide boat building
empire, founded by Christopher Columbus
Smith, was a leader in producing standardized
powered pleasure boats. Thousands have enjoyed
the cooling spray while boating on a warm
summer afternoon in a classic Chris-Craft.
Many antique boat enthusiasts easily recognize
the design features and rakish style of
these varnished mahogany beauties. Yet most
people know little about the early Chris
Smith runabouts or their features. Documentation
is sparse and photographs are rare, but
through careful research and interviews
with some owners of these rare boats, the
specifications begin to emerge.
It is commonly accepted that Chris Smith's
runabout business did not begin until the
establishment of Chris Smith and Sons Boat
Company in February 1922. In fact, as early
as 1915, Smith advertised his custom boat
building services in Power Boating Magazine,
urging readers to "Let Me Build You
A Smith Boat." |
 |
This promotional piece featured designs
for "pleasure launches, fast runabouts,
express cruisers and passenger carrying
hydroplanes." It also clearly showed
Smith's interest in and capabilities for
building pleasure boats long before he began
the runabout business in 1922. An increasingly
successful racing career probably encouraged
him to expand his business. Competitive
speedboat racing was a method by which boat
builders and hull designers tested the quality
of their ideas and gained recognition among
their peers, Many were propelled into the
ring as popular heros. The lust for speed
was fueled by such designers as John L.
Hacker, George Crouch, and Christopher Columbus
Smith, but financed by gamblers, industrialists,
and syndicates.
By 1915, Smith's proven winners, Baby
Speed Demon and Baby Reliance, were awarded
the American Power Boat Association's coveted
Gold Cup. His dreams for a successful pleasure
boat business began to take shape. Smith's
racing career continued to flourish during
the next several years. An admiring media
extolled the string of victories achieved
by the Miss Detroit series and it's championship
designer the "wizard 2 of Algonac."
Despite all his racing success, Smith apparently
did not wish to remain a one-dimensional
boat builder. Although most of his energies
seemed to concentrate on racing hulls, he
continued to solicit pleasure boat contracts.
Stunning documentation of Chris Smith's
ability and virtuosity as a hull designer
and boat builder is published in Lloyd's
Register of American Yachts. This premier
compilation of data regarding American and
Canadian-owned yachts offers indisputable
evidence of what was perhaps Smith's most
ambitious project, an 80-foot cruiser. The
record indicated a wooden-hulled vessel
named Hourless measuring 80ft.x16ft.x6ft.,
weighing 42 gross tons, and powered by twin,
six- cylinder Murray and Tregurtha gasoline
engines, designed and constructed by C.
C. Smith Boat Company, Algonac, Michigan,
in 1919 for Walter E. Flanders of Detroit,
Michigan. The cruiser enjoyed a long career,
continuing to appear in the registers as
the Hourless until 1947. Subsequent name
changes and final disposition of the vessel
are not indicated. It is, however, an astonishing
historical fact that Chris Smith, undoubtedly
with the assistance of his talented sons,
produced this 80- foot marvel. Their accomplishment
is all the more remarkable when you consider
that their giant boat building empire never
produced a standard cruiser greater than
72 feet in length. |
 |
By 1921, Smith
was marketing a standardized 26-foot express
runabout through a boat broker, the Central
Marine Service Corporation, Detroit, Michigan.
A remarkably informative advertisement about
this design appeared in the August 1921 issue
of Power Boating. The boat was powered with
a Hall-Scott four- cylinder 100 horsepower
engine and equipped with electric starting
and lighting, standard reverse gear, and water-cooled
exhaust. It sold for $3,950 and was available
in two models, a standard painted finish with
mahogany trim or a full mahogany hull for
$500 extra. |
| |
|
| Both models were built with
Smith's trademark double- planked bottom.
The ad also featured a rare photograph of
this runabout showing a large rear cockpit
design aft of the engine rather than the more
familiar forward steering. This is clear evidence
of a design transition. Smith's design reflected
the work of his contemporaries, who typically
built runabouts which resembled automobiles
with steering controls behind the engine.
Within two years, however, Smith redesigned
his runabouts with the more popular forward
steering. This will be discussed in more detail
later. There are no existing records to indicate
how many of these boats were built, but here
again is clear evidence that Chris Smith was
anticipating a move into pleasure boat production
before the storied dissolution of his racing
partnership with Gar Wood. The following year,
Chris Smith and his four sons, Jay W., Bernard,
Owen, and Hamilton, established the new Chris
Smith and Sons Boat Company. |
 |
| |
|
 |
What was perhaps
the company's first advertisement appeared
in the April 1922 issue of Motor Boat magazine.
Many of us have conformed to the popular notion
that the standard 26-foot runabout was the
only boat model initially offered by Chris
Smith and Sons. This ad contradicts that misconception
by listing four different models available.
First, there was a 24-foot, 18-mile-per-hour
runabout which sold f or $2,200. There were
also two different 26' models, a forward drive
double cockpit and a rear drive single cockpit.
They sold for $3,000 and $2,800, respectively.
These two models reflected the Smiths' transition
from the traditional rear cockpit design to
the modern forward cockpit steering. It also
indicated their awareness of what was in demand
by the popular market. The fourth model offered,
a 33-foot Baby Gar, may be a complete surprise
to many. |
| This
boat achieved advertised high performance
speeds from 50 to 60 miles per hour and sold
for $7,500. It is true, the first 33-foot
Baby Gar runabouts were built by Chris Smith
for Gar Wood. The original table of offsets
is found in the Chris-Craft Collection. Incidentally,
this same advertisement may be the first published
use of the nickname "Chris Smith Craft."
This was soon shortened to the better-known
Chris-Craft. |
| So what were the
first Chris- Crafts? Research into the early
accounting and purchase ledgers reveal that
the first hull built by the Smiths' new company
was not a runabout, but rather a racer, the
Packard-Chris Craft. It was contracted by
Colonel Jesse G. Vincent, founder of the Packard
Motor Car Company, and delivered to him in
August 1922 just in time to participate in
the Gold Cup races to be held the following
month in Detroit. |
 |
This powerful
new entry onto the racing scene measured
26ft.x6ft.x2ft. and was equipped with a
six-cylinder Packard 200 Hp. engine which
could achieve speeds up to 45.6 miles per
hour. The racer had a white painted hull
with the words Packard and Chris Craft written
in distinctive script on the sides. Colonel
Vincent drove Packard-Chris Craft to victory,
defeating GarWood, who had won the race
the previous five years. Wood's boat, Baby
Gar. Jr., was also a Chris Smith design.
A third Smith-built boat known as Chris
Craft II also participated in that Gold
Cup race. This boat was driven by Gar Wood's
brother George, no doubt in friendly competition,
It differed greatly in appearance from its
Packard counterpart because it was designed
as a standard 26- foot runabout with a single
cockpit and steering controls forward of
the engine. It was powered by a 180 horsepower
Hall-Scott model A7-A aviation engine which
proved to be too small for competitive racing.
Nevertheless, its importance lay in the
fact that this was the second hull built
by the Smiths. A previously unidentified
photograph found in the Chris-Craft Collection
provided a rare glimpse of this early runabout.
Through persistent research, the boat's
Gold Cup racing number, G-31, seen in the
photograph, was verified to be the Chris
Craft II.
This photograph proved an excellent source
of documentation for many features found
on the carly Smith runabouts. Several notable
details appear: a single cockpit forward
of the engine, no windshield, no lifting
rings, pleated upholstery, a raised engine
hatch, four large engine compartment vents
installed on the covering boards, a large
open rear cockpit with wicker chairs, and
dark seam compound instead of white deck
stripes. Another photograph of a 1922 model
boat identified as hull number four, named
the All Star, reveals many of the identical
features. One notable exception is that
the engine hatch was no longer raised, but
was redesigned and widened to give a smoother
appearance. This boat was originally owned
by Dr. W. E. Sanborn. |
 |
So did the Smiths
follow any standards in building these carly
runabouts? In addition to photographic resources,
the original hand-written specifications for
the 1922 model "Standard 26' Chris Craft"
are carefully preserved in The Mariners' Museum
Research Library and Archives. This seven-page
equipment and materials list unquestionably
confirms the original features, both seen
and hidden, found on these boats. The hull's
overall dimensions were 26ft.x6ft.6in.x24in.
The boat was powered by an eight- cylinder
Curtiss OX-5 aviation engine, converted for
marine use, which generated 90 horsepower
at 1400 rpm. |
It turned an
18x24 Hyde propeller, with a left-hand rotation
to achieve a maximum speed of 32 miles per
hour. A single forward cockpit provided
seating for three people including the driver,
while the larger aft cockpit could comfortably
carry five on a bench seat and two wicker
chairs. The standard double-planked mahogany
hull bottom was designed the same as the
26-foot Gold Cup model with canvas coated
in white lead laid between the layers and
the sides of batten seam construction. The
interior featured pleated blue upholstery
and gray linoleum flooring. Surprisingly,
all the deck hardware consisted of polished
brass instead of nickel. This included all
the following: cutwater, chocks, cleats,
vents, hatch handles, piano hinges, fuel
filler plate and cap, bow light, stern flagpole
socket, exhaust flanges, self- bailer, and
some additional items. All the instruments,
however, were nickel-plated, If you purchased
a Smith boat it was also equipped with some
accessories: mahogany paddle, mahogany pike,
canvas fenders, life preservers, 25-pound
anchor and line, mooring lines, and tools.
It is interesting to note that although
the boat was constructed primarily with
Philippine mahogany, it also included significant
amounts of white oak, butternut, spruce,
and ash. Construction costs for this sturdy
and well-appointed runabout were calculated
to be $997.50 plus motor, installation,
and overhead. The boat, therefore, retailed
for $3,200.00 plus tax. The Smiths were
very pleased with the performance and design
of the Chris- Craft, which was described
by A. W. Mackerer as a "splendid boat;
handles easily -- dry, fast and turns."
By 1924 very few changes were evident.
A slightly larger 100 horsepower Curtiss
OX-5 engine was offered and the runabout's
beam was widened two inches to 6ft.8in.,
but the addition of a windshield as standard
equipment was perhaps the most significant
improvement. This attractive curved bottom
tilt windshield was eventually offered in
two sizes. On the smaller one-piece model
the glass was mounted in a metal frame on
fifteen-inch stanchions; on the larger two-piece
model the glass was divided by a frame molding
and mounted on seventeen-inch stanchions.
Interestingly, the larger windshield secured
on fifteen-inch stanchions, is found on
the Miss Belle Isle in The Mariners' Museum.
After only two years in business, the Smiths
runabout was beginning to make an impact
on the marketplace. Rapid sales growth of
the Chris-Craft in the spring of 1924 resulted
in the company's increased production to
four boats per week. By May, forty-one new
boats were completed for delivery. |
 |
This new growth prompted a
media campaign in 1925 to expand the public
awareness of the Chris-Craft. A redesigned
runabout with a new forward double cockpit
illustrated full-page advertisements promoting
the ability of Chris Smith and Sons to maintain
lower prices as a result of their application
of "motor car standardization and volume
production methods" for their boats.
The Smiths were probably the first boat builders
to apply these techniques. In an effort to
stay ahead of their competition, they cleverly
offered the first time payment plan ever presented
for selling boats. A potential buyer only
needed a down payment of $1,340 to secure
his Chris-Craft, with the balance due within
twelve months. Another sales incentive fully
guaranteed the quality of each boat against
construction defects for one year. The literature
declared, "It is so nearly trouble-proof
that this guarantee has cost an average of
only $6 a boat." |
| The Smiths also
tried to avert any possible consumer fears
of unscrupulous dealers who would not honor
the company's guarantee with the statement,
"When you purchase a Chris Craft, you
deal directly with the builders, who are fully
responsible for service." Several more
years passed before a dealer network was established. |
| Encouraged by their
early success and eager to reach a national
market, the Smiths registered their first
boat display at the 1926 National Motor Boat
Show held in New York City. Here was a wonderful
opportunity for the boating public to comparison
shop. Fortunately, the Smiths received a great
boost from the show's advanced publicity found
in Yachting Magazine. Its editor awarded Chris
Smith and Sons Boat evolved and built what
are today recognized by many as the world's
fastest boats. This new model assures the
Chris-Craft owner a complete unit, economical
to operate, fully guaranteed, and setting
an envious pace for safety, comfort, speed
and smartness." what a recommendation!
The 1926 model did offer two new features,
a larger 150 horsepower Kermath engine and
a reinforced tilt windshield. This redesigned
and strengthened windshield had a solid wood
base. It replaced the stanchion- mounted model,
which lacked rigidity. Despite only four years
in business, the young Chris Smith and Sons
Boat Company had achieved a reputation for
excellence. Their standard 26-foot runabout
known as the Chris-Craft was speedy, strong,
safe, and stylish. |
 |
Continuing improvements,
along with an expanding product line, attracted
an increasing share of the boating market.
The ambitious Smiths made a calculated risk
in starting a pleasure boat company, but
their love of boats and history of success
carried over from racers to runabouts. A
boating dynasty was begun. |
| Tom Crew was The Mariners' Museum Archivist
for 14 years, from 1982-1996, and responsible
for arrangement, preservation, and administration
of the manuscript and photographic collections
of The Mariners' Museum, and has acquired
a national reputation as an expert on the
history of Chris-Craft boats.
Feel free to contact Jerry Conrad, the
current Chris-Craft Archivist of The Mariners'
Museum at chriscraft@mariner.org or (757) 591-7785, Monday through Friday,
9 A.M. to 5 P.M. |
|
|
 |
|
|
|